Standard: HD 604 S1
DIN VDE 0276 part 604
Nominal voltage U0/U: 0,6/1 kV
Test voltage: 4 kV
CONSTRUCTION
Conductor: solid annealed copper conductor, class 1 or multi wire class 2, according to
DIN VDE 0295, IEC 60228
Insulation: cross-linked polyethylene (XLPE)
type 2XI1 acc. to HD 604 S1/DIN VDE 0276-604
Core: concentrically stranded cores, colour marked acc. to HD 308 S2/VDE 0293-308, with or without protective yellow-green conductor
Filler: extruded halogen free layer over stranded cores.
Sheath: thermoplastic halogen-free, flame retardant polyolefin layer, HM4 according to
DIN VDE 0250-214
Sheath colour: black
Flame retardant: IEC 60332-1
No flame propagation: IEC 60332-3 cat. C
Halogen-free: IEC 60754-1
Non-corrosive combustion gases: IEC 60754-2
Low smoke density: IEC 61034-2
APPLICATION
Cables are used for applications where harm to human life and damage to property must be prevented in the event of fire, e. g. in power stations, industrial installations, hotels, airports, underground stations, railway stations, hospitals department stores, banks, schools theaters etc. Suitable for fixed installation in dry or damp environments, in, above, on and beneath plaster as well as in masonary walls and in concrete.
Permissible conductor temperature:
– max operating temperature +90°C
– in short circuit (max 5 s), max +250°C
Permissible environment temperature:
at laying and handling, min. -5C
BENDING RADIUS (min.):
– single core cables 15D; (D – cable diameter)
– for multi-wires cable 12D
