Standard: DIN VDE 0250 part 214/215
Nominal voltage U0/U: 300/500 V
Test voltage: 2,0 kV
CONSTRUCTION
Conductor: solid annealed copper conductor, class 1 or multi wire class 2, according to
DIN VDE 0295, IEC 60228
Insulation: cross-linked halogen-free polymer, 2XI1 acc. to HD 604 S1/DIN VDE 0276-604
Core: concentrically stranded cores, colour marked acc. to HD 308 S2/VDE 0293-308, with or without protective yellow-green conductor
Filler: extruded halogen free layer over stranded cores.
Sheath: thermoplastic halogen-free flame retardant polyolefin layer, HM2 acc. to
DIN VDE 0250-214
Sheath colour: light grey RAL 7035
Flame retardant: IEC 60332-1
Halogen-free: IEC 60754-1
Non-corrosive combustion gases: IEC 60754-2
Low smoke density: IEC 61034-2
APPLICATION
For installation for permanent laying in dry and wet spaces over, on, in and under plaster. The direct laying into vibrant and over stressed plaster is not permissible. It can be placed in free space, if protected from direct solar radiation. It cannot be placed to the land and water. Characteristics of the cable in case of fire:
– do not spread flame,
– combustion elements do not contain halogen
elements,
– has a low density of smoke in process of fire.
Permissible conductor temperature:
– max operating temperature +70°C
– in short circuit (max 5 s), max +160°C
Permissible environment temperature:
– for fix laying cables, -30C to +70C
– for movable cables, -5C to +60C
BENDING RADIUS (min.):
– single core cables 15D; (D – cable diameter) – multi core cables 12D; (D – cable diameter)
